Dry Ice Blasting Mold in STUDIO CITY, California Without the Mess

Cryogenic mold removal that cleans framing, not floods it

Dry Ice Blasting Mold in STUDIO CITY, California is the fastest way to strip mold off exposed framing, sheathing and crawl space joists without soaking your home. We blast with frozen CO2 pellets that lift spores and residue, then HEPA-vacuum and treat every surface. If your attic, basement or water-damaged walls are growing black mold, call (833) 929-5837 today.

A powerful image of molten metal pouring in a heavy industry steel mill setting.

What Dry Ice Blasting Mold in STUDIO CITY, California Actually Does

Dry Ice Blasting Mold in STUDIO CITY, California is a cryogenic cleaning method that fires soft dry ice pellets at roughly -109 degrees Fahrenheit through a compressed-air nozzle. The pellets hit mold, and the extreme cold makes the growth brittle while the kinetic energy knocks it loose. The pellets sublimate on contact, turning straight from solid to gas, so there is no water, no sand, no chemical slurry and nothing left behind to dry. On exposed framing, joists, subfloor and crawl space beams, that means mold comes off in a single pass instead of being scrubbed into the wood grain.

Studio City homes get hit hard by water damage mold because so much of the housing stock is older, with original plumbing, shallow crawl spaces and attic decks that trap heat and humidity. A roof leak in Fryman Canyon or a slab leak near the Ventura Boulevard Corridor can feed black mold growth behind drywall for weeks before anyone smells it. When you need dry ice mold remediation in Studio City CA, we remove the growth without tearing the structure apart, then verify the result with post-remediation mold testing.

Why Studio City Homeowners Choose Dry Ice Blasting

Dry ice blasting for mold on framing in STUDIO CITY solves a problem traditional scrubbing cannot: it cleans the wood without adding moisture back into a building that is already wet. Here is what that means for your project.

No Secondary Water Damage

Every wet-cleaning method adds moisture to wood you are trying to dry. Dry ice pellets sublimate on impact, so the substrate stays dry and your dehumidifier is not fighting the remediation crew. On a typical 400-square-foot attic, that saves 24 to 48 hours of extra drying time and lowers the odds of regrowth.

Reaches Tight Framing

Dry ice blasting mold removal STUDIO CITY California crews can reach inside wall cavities, between joists and behind mechanical runs where sanding and wire brushes cannot fit. A borescope camera confirms growth in a 14-inch stud bay, and the blasting nozzle follows it in. No demolition required to get the surface clean.

No Chemical Residue

Because the media disappears, there is nothing to rinse and no chemical film left on the framing. We still apply an antimicrobial coating afterward, but the wood is clean before that step. That matters when you are prepping a crawl space for encapsulation sealants or a new vapor barrier.

Faster Turnaround

A single-story crawl space that would take three days to hand-scrub and dry can be blasted, HEPA-vacuumed and treated in one day. Most Studio City residential jobs finish in 4 to 8 hours of on-site work, which means you get your house back sooner and your rebuild can start the next morning.

Why Studio City Homeowners Choose Dry Ice Blasting

How Our Dry Ice Blasting Mold Process Works

Every job follows the same five stages, from the first inspection to the final clearance test. You will know what is happening at each step and how long it takes.

1

Inspection and Mapping

We start with a moisture meter, thermal imaging camera and borescope camera to find every wet zone, not just the visible mold. Readings get logged room by room. This usually takes 60 to 90 minutes on a typical Studio City home and tells us exactly which framing bays need blasting.

2

Containment Setup

We build containment barriers with 6-mil plastic sheeting and zipper doors, then run a negative air machine with HEPA filters so spores cannot drift into living space. Technicians suit up in Tyvek suits and respirators. Setup runs 45 to 90 minutes depending on how many rooms are affected.

3

Dry Ice Blasting

Our dry ice blasting machine fires pellets at the mold while a second technician holds a HEPA vacuum at the point of contact to capture debris in real time. We work bay by bay, checking progress with the borescope. A 300-square-foot crawl space typically takes 2 to 4 hours to blast clean.

4

HEPA Vacuum and Antimicrobial Treatment

Once blasting is done, we HEPA-vacuum every surface and apply a mold remediation chemical such as Concrobium or Benefect to the cleaned framing. If the space will be encapsulated, we follow with an antimicrobial coating. This stage adds 1 to 2 hours and leaves the wood ready for rebuild.

5

Clearance Testing

We run post remediation mold testing with air samples and surface swabs, comparing results against the baseline from day one. If spore counts are back to normal outdoor levels, we hand you the clearance report. Lab turnaround is usually 24 to 48 hours.

Why Studio City Calls Us for Dry Ice Blasting Mold

We are a local crew that runs dry ice equipment every week, not a general contractor renting a machine for the first time. Here is what that means when you hire us.

Same-Week Scheduling

Most dry ice blasting services STUDIO CITY CA jobs get scheduled within 3 to 5 business days of the inspection, and emergency water damage mold calls get priority. We keep two blasting rigs available so a burst pipe in Colfax Meadows does not wait behind a commercial project.

Documented Clearance

We do not call a job done until lab results confirm it. Every project ends with post remediation mold testing and a written clearance report showing spore counts before and after. That report is what your insurance adjuster and your real estate agent will ask for.

Containment Done Right

Negative air machines, HEPA filters and zipper doors are standard on every job, not upsells. We seal HVAC vents before blasting so mold contamination does not spread through your ductwork. If your system is already affected, we scope that separately and treat it.

Straight Pricing

You get one number before we start, based on the square footage and access conditions we measured during inspection. Affordable dry ice blasting mold STUDIO CITY California pricing means no surprise line items for containment, vacuuming or treatment. If the scope changes mid-job, we stop and talk to you first.

What Is Included in Dry Ice Blasting Mold Service

Every dry ice blasting mold job includes inspection, containment, blasting, HEPA cleanup, antimicrobial treatment and clearance testing. Rebuild work such as drywall replacement, painting and insulation install is quoted separately so you can use your own contractor if you prefer.

What's Included

Full Moisture and Mold Inspection

Thermal imaging, moisture meter readings and borescope inspection of every suspect cavity, with a written scope of work and photo documentation before any equipment moves in.

Containment and Negative Air

Plastic sheeting, zipper doors, duct tape seals and a negative air machine with HEPA filters running for the duration of the job to keep spores out of your living space.

Dry Ice Blasting of Affected Surfaces

Cryogenic blasting of framing, joists, sheathing, subfloor and block walls, with simultaneous HEPA vacuum capture at the nozzle. Includes a second pass on any stubborn areas.

Antimicrobial and Encapsulation Prep

Application of Concrobium or Benefect to cleaned surfaces, plus surface prep for encapsulation sealants if your crawl space or attic is being sealed afterward.

Post-Remediation Clearance Testing

Air samples and surface swabs sent to an accredited lab, with a written clearance report showing spore counts compared to the outdoor baseline.

Debris Removal and Site Cleanup

All spent containment materials, filters and bagged debris are removed and disposed of properly. We leave the work area broom-clean and ready for your rebuild crew.

Mold Problems Dry Ice Blasting Solves in Studio City

These are the calls we get most often from Studio City homeowners and property managers. Each one has a dry ice solution that avoids tearing the building apart.

01
The Problem

Black mold growth on attic roof sheathing after a roof leak

Spores drop into living space through ceiling gaps and HVAC returns, and the musty odors spread through the whole house within weeks.

Our Solution

We contain the attic, blast the sheathing and rafters clean, HEPA-vacuum the entire deck, and treat with an antimicrobial coating. Most attic jobs finish in one day, and clearance testing confirms the air is safe before we pack up.

02
The Problem

Crawl space mold on floor joists from chronic ground moisture

Joists soften, subfloor squeaks, and the mold keeps returning every rainy season because the moisture source was never addressed.

Our Solution

We blast the joists and girders, treat the wood, and identify the moisture source with a moisture meter. If you need a vapor barrier or encapsulation afterward, we prep the surfaces so the next contractor can install it cleanly.

03
The Problem

Water damage mold behind drywall after a slab or supply line leak

Drywall has to come out anyway, but the framing behind it is often covered in mold that a wipe-down will not remove.

Our Solution

Once the wet drywall is removed, we blast the exposed studs and plates, vacuum the cavity, and treat the framing. Rebuild can start the next day with clean, dry lumber instead of contaminated wood.

04
The Problem

HVAC mold contamination spreading spores through the house

Every time the system runs, it redistributes spores into bedrooms and living areas, which makes the mold problem worse instead of better.

Our Solution

We seal the vents, blast the accessible plenum and coil cabinet surfaces, and HEPA-vacuum the system. If ductwork is heavily contaminated, we scope replacement and coordinate with your HVAC contractor.

When to Call for Dry Ice Blasting Mold

1

A Studio City homeowner finds mold on framing after pulling out water-damaged drywall from a bathroom leak near Tujunga Village.

Solution

We inspect the exposed cavity with a borescope, set containment, and blast the studs and plates clean. Antimicrobial treatment follows, and we run clearance testing before the rebuild crew closes the wall.

Outcome

The wall goes back together with clean framing, and the homeowner has a clearance report for their records and insurance file.

2

A property manager at a Ventura Boulevard Corridor commercial building discovers mold in a mechanical room after a chiller line leak.

Solution

We schedule after-hours blasting so the building stays open, contain the mechanical room, blast the block walls and equipment supports, and HEPA-vacuum the space.

Outcome

The mechanical room passes clearance testing, and the building reopens the next morning without disrupting tenants.

3

A hillside homeowner in Oakdell Canyon has recurring attic mold every spring from roof condensation and poor ventilation.

Solution

We blast the sheathing and rafters, treat the wood, and document the ventilation gaps we find so the homeowner can have them corrected before next season.

Outcome

The attic is clean, the musty odors are gone, and the homeowner knows exactly what to fix to stop the mold from returning.

4

A real estate agent needs a fast mold cleanup before a Studio City home goes on the market next week.

Solution

We inspect, blast and treat the affected crawl space in a single day, then rush the clearance samples to the lab for 24-hour turnaround.

Outcome

The clearance report is in the agent's hands before the listing photos are taken, and the sale stays on schedule.

Tools and Methods We Use for Dry Ice Blasting

Tools & Equipment

Dry Ice Blasting Machine

Fires CO2 pellets at controlled pressure to strip mold from framing, joists and block walls without abrasion or moisture.

Thermal Imaging Camera

Reveals hidden moisture pockets behind drywall and under flooring before we open anything up.

Borescope Camera

Lets us inspect inside closed wall cavities and crawl space bays to confirm mold growth and verify blasting results.

HEPA Vacuum and Air Scrubber

Captures airborne spores and debris at the nozzle and scrubs the containment air during and after blasting.

Negative Air Machine

Maintains negative pressure inside containment so spores cannot escape into living space during the job.

Dri-Eaz Dehumidifier

Pulls residual moisture out of framing and subfloor after water damage, so the wood is dry before treatment.

Moisture Meter

Gives us numeric readings on wood and drywall moisture content so we know when a surface is actually dry.

Methods & Techniques

IICRC S520 Mold Remediation Standard

We follow the IICRC S520 framework for containment, removal, cleaning and clearance, which is the industry standard insurance carriers recognize. Every job is documented against that standard.

Negative Pressure Containment

Containment barriers with zipper doors and a negative air machine keep the work zone sealed. Air is filtered through HEPA filters before it leaves the containment, so spores never reach the rest of your home.

Cryogenic Surface Cleaning

Dry ice pellets sublimate on contact, lifting mold and residue without water or abrasive media. The process works on wood, brick, concrete and metal without damaging the substrate.

Antimicrobial Treatment with Concrobium or Benefect

After blasting, we apply an EPA-registered antimicrobial to the cleaned surfaces. Both products are low-odor and safe for occupied homes once dry.

Post-Remediation Verification

Air samples and surface swabs go to an accredited lab, and we compare results to an outdoor baseline. You get a written clearance report, not just a verbal all-clear.

How Dry Ice Blasting Mold Runs in Studio City

Studio City sits in a pocket where hillside moisture, older plumbing and dense tree canopy all push water into places it should not be. Homes in Fryman Canyon and Oakdell Canyon deal with roof leak mold after winter storms, while properties closer to the Ventura Boulevard Corridor fight slab leaks and sewer backups that soak drywall and framing. Much of the housing stock was built before 1970, which means original galvanized supply lines, shallow crawl spaces and attic decks with minimal ventilation. When you call for dry ice blasting mold in STUDIO CITY California, we plan around those conditions: tighter containment in low-clearance crawl spaces, extra HEPA filtration in attics with limited access, and blasting schedules that work around hillside parking and narrow driveway access. If you have been searching for dry ice blasting mold near me Studio City CA, we cover the whole area, from Silver Triangle bungalows to Longridge Estates hillside homes. We also coordinate with your insurance adjuster and provide the documentation they need.

Service Areas

Fryman Canyon

Hillside homes with heavy tree cover and roof drainage issues that drive attic and ceiling mold after winter rains.

Colfax Meadows

Mid-century single-story homes with original plumbing and shallow crawl spaces that trap moisture year-round.

Tujunga Village

Older bungalows near the village with bathroom and kitchen leaks that feed mold behind original tile and drywall.

Silver Triangle

Mix of renovated and original homes where slab leaks and HVAC condensation create recurring mold problems.

Longridge Estates

Larger hillside properties with multi-level framing and complex crawl space layouts that need careful containment planning.

Local Considerations

Winter rain intrusion on hillside properties

Roof and window leaks in Fryman Canyon and Oakdell Canyon soak attic sheathing and wall cavities, giving mold a head start before the rain stops.

Shallow crawl spaces with poor ventilation

Ground moisture condenses on floor joists in Colfax Meadows and Studio Village, and the mold returns every season unless the source is addressed.

Aging galvanized and copper supply lines

Slow pinhole leaks behind walls in pre-1970 homes feed hidden mold growth that only shows up as a musty odor or a stain on the baseboard.

Dense tree canopy and leaf debris

Clogged roof drains and gutters push water into fascia and eaves, which is one of the most common sources of attic mold we find in Studio City.

Attic Sheathing After Roof Leak

Before

A 1958 home near Fryman Canyon had a slow roof leak for two winters. The attic sheathing showed black mold growth across roughly 220 square feet, and the musty odors were reaching the second-floor bedrooms through ceiling gaps.

After

We contained the attic, blasted the sheathing and rafters, HEPA-vacuumed the deck and applied antimicrobial treatment. Clearance testing came back at normal outdoor spore levels, and the odors cleared within 48 hours.

Maintenance & Follow-up

Fix the roof leak, add ridge and soffit ventilation, and check the attic with a flashlight each fall before the rainy season starts.

Before

A single-story Colfax Meadows home had visible mold on floor joists and girders across a 400-square-foot crawl space. Moisture meter readings on the joists were above 20 percent, and the homeowner noticed a musty smell in the living room.

After

We blasted the joists and girders, treated the wood with Concrobium, and installed a temporary dehumidifier to bring moisture content down below 12 percent. Clearance testing passed, and the homeowner scheduled a vapor barrier install for the following month.

Maintenance & Follow-up

Keep the crawl space vents clear, run a dehumidifier during humid months, and have the space inspected once a year.

Before

A Tujunga Village bungalow had a slow supply line leak behind the bathroom wall for months. When the homeowner opened the wall, the studs and bottom plate were covered in mold, and the adjacent bedroom smelled musty.

After

We set containment, blasted the exposed studs and plates, HEPA-vacuumed the cavity and treated the framing. The rebuild crew closed the wall the next day with clean lumber, and post remediation mold testing confirmed the bedroom air was clear.

Maintenance & Follow-up

Replace aging supply lines before they fail, run the bathroom exhaust fan for 15 minutes after every shower, and check under the sink monthly for drips.

What Dry Ice Blasting Mold Costs in Studio City

Typical 2026 pricing for dry ice blasting mold in Studio City runs from $1,800 for a small attic or single wall cavity to $7,500 or more for a full crawl space and attic combination with extensive growth. The biggest cost drivers are square footage of affected surface, access difficulty and whether clearance testing shows the job needs a second pass. We quote one flat number after inspection, so you are not guessing. If you have been looking for affordable dry ice blasting mold STUDIO CITY California pricing, we will walk you through the estimate line by line before you commit.

Pricing Factors

Square footage affected

Blasting is priced by the surface area we treat. A 150-square-foot attic section costs far less than a 600-square-foot crawl space with joists, girders and block walls.

Access difficulty

Crawl spaces with low clearance, attics with no walkway and hillside homes with limited equipment access add labor time. We measure access during inspection so the quote reflects reality.

Containment complexity

Multi-room containment with negative air machines and zipper doors costs more than a single sealed space. Occupied homes with pets or children need extra sealing and scheduling care.

Severity of growth

Light surface mold blasts off in one pass. Heavy growth that has penetrated wood grain or spread across multiple framing bays takes longer and may need a second treatment.

Clearance testing requirements

Standard post remediation mold testing includes air samples and surface swabs. Larger homes or commercial spaces need more sample points, which adds lab cost.

Debris disposal and site cleanup

Bagging, removing and properly disposing of containment materials and filters is included in every quote. Unusual debris volumes from demolition add cost.

Typical Investment Range

$1,800 - $7,500+ depending on scope

Actual pricing varies based on project scope and requirements

Value You Receive

Dry ice blasting costs more per square foot than hand-scrubbing, but it saves money on the back end. You avoid extra drying days, chemical cleanup and repeat treatments, and you get a documented clearance report that supports insurance claims and resale.

Frequently Asked Questions About Dry Ice Blasting Mold

Have questions? We have answers. If you don't see your question here, feel free to contact us.

Call Us
How much does dry ice blasting mold cost in STUDIO CITY California?

Most Studio City residential jobs run $1,800 to $7,500 in 2026, depending on square footage, access and severity. A single attic section or wall cavity sits at the low end. A full crawl space plus attic with heavy growth sits at the high end. We quote a flat number after inspection, and that number includes containment, blasting, HEPA cleanup, antimicrobial treatment and clearance testing.

Is dry ice blasting safe for mold removal in Studio City CA?

Yes. Dry ice blasting is safe for wood framing, brick, concrete and metal when done by trained technicians. The pellets sublimate into CO2 gas, so there is no water or chemical residue left on the surface. We run negative air machines and HEPA filters during the job, and technicians wear Tyvek suits and respirators. Occupants stay out of the containment zone until clearance testing passes.

What is dry ice blasting and how does it remove mold in STUDIO CITY?

Dry ice blasting fires frozen CO2 pellets at roughly -109 degrees Fahrenheit through a compressed-air nozzle. The cold makes mold brittle, and the impact lifts it off the surface. The pellets turn straight into gas on contact, so nothing is left behind. We capture debris with a HEPA vacuum at the nozzle, then treat the cleaned surface with an antimicrobial.

Is dry ice blasting better than traditional mold removal in Studio City California?

For exposed framing, crawl spaces and attics, yes. Traditional scrubbing adds moisture and leaves residue in wood grain. Dry ice blasting cleans deeper, dries instantly and reaches spots a brush cannot. For mold behind intact drywall, both methods require opening the wall first. We will tell you during inspection which approach fits your situation.

Credentials and Reviews

Certifications

IICRC Certification by Institute of Inspection, Cleaning and Restoration Certification
ACAC Certification by American Council for Accredited Certification
EPA Lead-Safe Certification by U.S. Environmental Protection Agency
California Contractors State License Board (CSLB) License by California Contractors State License Board
Indoor Air Quality Association Certification by Indoor Air Quality Association

Customer Reviews

Google

We had mold on the attic sheathing after a roof leak in Fryman Canyon. The crew contained the attic, blasted everything clean in one day, and had clearance results back in 48 hours. The musty smell in the bedrooms is gone. Documentation was thorough enough that our insurance covered most of it.

Yelp

Crawl space mold in our Colfax Meadows home had been coming back every year. They blasted the joists, treated the wood and told us exactly what was causing the moisture. No upselling, no pressure. Six months later the crawl space is still dry and clean.

BBB

We manage a commercial building on Ventura Boulevard and had mold in a mechanical room after a chiller line leak. They worked after hours so tenants were not disrupted, and the clearance report was in our hands the next morning. Professional from start to finish.

Google

Bathroom leak in our Tujunga Village bungalow led to mold on the framing behind the wall. They blasted the studs, treated everything and coordinated with our contractor so the rebuild could start the next day. Fair price and no surprise charges.

Related Services

Explore our other professional services

Mold Inspection Near Me

Before any blasting, we inspect with thermal imaging and moisture meters to map exactly where mold is growing in your Studio City home. This is the first step for every dry ice blasting mold project.

Mold Inspection Near Me

Mold Inspection

A full visual and instrument-based inspection identifies mold species, affected square footage and moisture sources. It gives us the scope we need to quote dry ice blasting accurately.

Mold Inspection

Mold Testing

Lab testing confirms what is growing and how severe it is. We use results to plan blasting pressure and containment, and to set a baseline for post-remediation clearance.

Mold Testing

Mold Testing Near Me

Same-week mold testing for Studio City homeowners who need answers fast. Samples go to an accredited lab, and results come back in 24 to 48 hours.

Mold Testing Near Me

Certified Mold Inspector

Our certified inspectors document every finding with photos and readings. That documentation supports your dry ice blasting scope and your insurance claim.

Certified Mold Inspector

Black Mold Inspection

Black mold growth on framing and sheathing is one of the most common reasons homeowners call us. We confirm the species and plan cryogenic removal.

Black Mold Inspection

Home Mold Inspection

Whole-home inspection covers attic, crawl space, bathrooms, kitchen and HVAC. It is the fastest way to find every mold problem before blasting starts.

Home Mold Inspection

Residential Mold Testing

Air and surface sampling for single-family homes and condos. Results guide the dry ice blasting plan and confirm clearance afterward.

Residential Mold Testing

Commercial Mold Inspection

We inspect offices, retail and multi-unit buildings along the Ventura Boulevard Corridor. Dry ice blasting lets us work after hours without shutting the building down.

Commercial Mold Inspection

Mold Remediation Company

As a licensed mold remediation company, we handle inspection, blasting, treatment and clearance under one roof, so you are not coordinating multiple contractors.

Mold Remediation Company

Emergency Mold Testing Services

When a burst pipe or sewage backup soaks your home, we test fast so dry ice blasting can start before mold spreads further.

Emergency Mold Testing Services

Same Day Mold Testing

Same-day sampling for urgent Studio City jobs. We collect samples in the morning and often have preliminary results the next day.

Same Day Mold Testing

Basement Mold Inspection

Basement flooding mold is common in older Studio City homes. We inspect block walls, floor joists and subfloor before planning blasting.

Basement Mold Inspection

Attic Mold Testing And Removal

Attic mold from roof leaks and poor ventilation is our most frequent dry ice blasting job. We test, blast, treat and clear the space in one visit.

Attic Mold Testing And Removal

Air Quality And Mold Testing

Indoor air quality testing measures spore counts before and after blasting. It is the proof you need that the job actually worked.

Air Quality And Mold Testing

Mold Remediation Near Me

Local crews who know Studio City housing stock. We schedule dry ice blasting within days, not weeks, of your inspection.

Mold Remediation Near Me

Crawl Space Mold Removal

Crawl space mold on joists and girders is a perfect fit for dry ice blasting. We clean the wood without adding moisture to an already damp space.

Crawl Space Mold Removal

Bathroom Mold Removal Service

Bathroom mold behind tile and drywall often hides wet framing. Once the wall is open, we blast the studs and treat before rebuild.

Bathroom Mold Removal Service

Toxic Mold Removal

When testing identifies toxic species, we contain the area, blast the affected surfaces and verify clearance with lab results before anyone reoccupies the space.

Toxic Mold Removal

Mold Abatement

Full abatement includes containment, removal, cleaning and disposal. Dry ice blasting is the cleaning method we use on exposed framing and structural surfaces.

Mold Abatement

Professional Mold Removal

Trained, certified technicians using commercial-grade equipment. Every job follows the IICRC S520 standard and ends with documented clearance.

Professional Mold Removal

Mold Cleanup Near Me

Fast mold cleanup for Studio City homes and businesses. We handle small wall cavities and full crawl space projects with the same process.

Mold Cleanup Near Me

Water Damage Mold Remediation

Water damage mold needs to be addressed fast. We dry the structure, blast the mold off framing and treat the wood before rebuild begins.

Water Damage Mold Remediation

Mold Spore Testing

Spore testing measures airborne mold levels. We use it as a baseline before blasting and as proof of clearance afterward.

Mold Spore Testing

Post Remediation Mold Testing

Clearance testing after dry ice blasting confirms spore counts are back to normal. You get a written report for insurance and resale.

Post Remediation Mold Testing

Mold Fogging Treatment

Fogging reaches surfaces that blasting cannot, such as ductwork and tight cavities. We combine fogging with blasting on complex jobs.

Mold Fogging Treatment

Affordable Mold Remediation

Flat-rate pricing with no surprise line items. We quote the full scope after inspection so you know the number before we start.

Affordable Mold Remediation

24 Hour Mold Removal

Emergency response for water damage and active mold growth. Call (833) 929-5837 any time and we will schedule the earliest available slot.

24 Hour Mold Removal

Odor Removal Mold

Musty odors linger even after mold is dead. We treat the source, then use air scrubbing and fogging to clear the smell from the space.

Odor Removal Mold

Schedule Dry Ice Blasting Mold in STUDIO CITY, California

If you have mold on framing, sheathing or crawl space joists, we can blast it clean and prove it with lab results. Call (833) 929-5837 or book an inspection online. We will assess your property, quote a flat price and schedule the work.